Current clamp TP-CC400

Current clamp TP-CC400

The Current clamp TP-CC400 is a current clamp that will allow your oscilloscope to measure electrical currents up to 400 Ampère AC/DC. When measuring with this current clamp, there is no need to break a closed circuit or to affect the isolation.

The wide jaws allow performing measurements on thick conductors.

For measuring DC current, a simple to operate zero adjust button is available.

To connect the Current clamp TP-CC400 to your oscilloscope, a BNC to banana measure lead is required, which must be ordered separately. For oscilloscopes with differential inputs, the Measure lead TP-C812B is recommended. For oscilloscopes with single-ended inputs the Measure lead TP-BNCI-100 is recommended.

Order code: TP-CC400
EAN: 7423620651606
Price: 111.90

Category: Current Clamps

The table below shows detailed specifications of the Current clamp TP-CC400.

Electrical

BandwidthDC to 20 kHz (-3dB)
Effective measurement range 
40 A rangeoutput 10 mV/A, 1 V = 100 A
400 A rangeoutput 1 mV/A, 1 V = 1000 A
Accuracy 
DC 40 A range±(3.5% + 6 digits) (0 - 20 A)
±(4% + 10 digits) (20 A - 40 A)
DC 400 A range±(3.5% + 6 digits) (0 - 300 A)
±(4.5% + 6 digits) (300 A - 400 A)
AC 40 A range±(4% + 10 digits) (0 - 20 A)
±(5% + 10 digits) (20 A - 40 A)
AC 400 A range±(4.5% + 10 digits) (0 - 300 A)
±(5% + 10 digits) (300 A - 400 A)
Output connectioncable with 2 shrouded 4 mm female banana sockets
 

Dimensions

Captured conductor size20 mm maximum
Weight240 g
Height38 mm (1.5 inch)
Length190 mm (7.5 inch)
Width70 mm (2.8 inch)
Length of cable30 cm (11.8 inch)
 

Power Requirements

Power indicatorGreen LED
Battery typeStandard 9 V IEC 6F22 cell
Battery life80 hours typical with alkaline
Low battery indicationRed LED
 

Ambient

Operating Temperature0 to 50 °C
Relative Humidity25 to 70%
Storage Temperature-20 to 70 °C
Relative Humidity25 to 80%
 

Certifications and Compliances

CE mark complianceYes
RoHSYes

The Current clamp TP-CC400 is delivered with:

AmountItem
1 Carrying case
1 Current clamp TP-CC400

DescriptionVersionRemarksSize
Current clamp TP-CC400 user manual1.3English342.50 kB download

RELATED ARTICLES