Back Probe TP-BP85
The Back Probe TP-BP85 is a thin and flexible back probe. The back probe can be used on any measuring lead with 4 mm banana plugs. The long, thin and flexible tip makes it possible to connect to hard to reach places.
The Back Probe TP-BP85 - Set comes in a set containing 8 back probes, four black ones, a red one, a yellow one, a green one and a blue one. Back probes can also be ordered individually.
Category: Alligator clips & test probes
The Back Probe TP-BP85 is very useful in back probing connectors to measure in an existing circuit without having to use a break out box or damage the wire isolation. The long, thin and flexible pins can easily be slided between the connector housing and the contacts in the connector.
The table below shows detailed specifications of the Back Probe TP-BP85.
Each back probe
|Connector||4 mm banana socket|
|Rated voltage||1000 V|
|Total length||45 mm|
|Unisolated length||25 mm|
|Color||black, red, yellow, green or blue|
The Back Probe TP-BP85 is available in 5 different colors or in one set of 8:
The Back Probe TP-BP85 is delivered with:
|1||Back Probe TP-BP85 - Red|
|1||Back Probe TP-BP85 - Green|
|1||Back Probe TP-BP85 - Blue|
|1||Back Probe TP-BP85 - Yellow|
|4||Back Probe TP-BP85 - Black|