Current clamp TP-CC600

Current clamp TP-CC600

The Current clamp TP-CC600 is a current clamp that will allow your oscilloscope to measure electrical currents up to 600 A AC/DC, with a frequency response up to 400 Hz. When measuring with this current clamp, there is no need to break a closed circuit or to affect the isolation.

The wide jaws allow performing measurements on thick conductors.

For measuring DC current, a simple to operate zero adjust button is available.

Order code: TP-CC600
Price: € 84.80

Category: Current Clamps

The table below shows detailed specifications of the Current clamp TP-CC600.

Electrical

BandwidthDC to 400 Hz (-3dB)
Effective measurement range 
200 A rangeoutput 1 mV/A, 1 V = 1000 A
600 A rangeoutput 0.1 mV/A, 1 V = 10000 A
Accuracy 
DC 200 A range±(3% ± 0.6 A)
DC 600 A range±(3.5% ± 3 A)
AC 200 A range±(3.5% ± 0.4 A)
AC 600 A range±(4% ± 4 A)
Output connection2 shrouded 4 mm banana sockets
 

Dimensions

Captured conductor size30 mm maximum
Weight240 g
Height30 mm (1.2 inch)
Length209 mm (8.2 inch)
Width43 mm (1.7 inch)
 

Power Requirements

Power indicatorRed LED
Battery typeStandard 9 V IEC 6F22 cell
Low battery indicationRed LED
 

Ambient

Operating Temperature0 to 50 °C
Relative Humidity25 to 70%
Storage Temperature-20 to 60 °C
Relative Humidity25 to 80%
 

Certifications and Compliances

CE mark complianceYes
RoHSYes

The Current clamp TP-CC600 is delivered with:

AmountItem
1 Current clamp TP-CC600

DescriptionVersionRemarksSize
Current clamp TP-CC600 user manual1.2English429.28 kB download

RELATED ARTICLES

Performing a relative compression test

The relative compression test in Multi Channel oscilloscope software is briefly explained, with instructions on how to perform a relative compression test with just a lab scope and current clamp.
Read whole article...