Automotive scope ATS5004D specifications

The tables below show detailed specifications of the Automotive scope ATS5004D. Jump to acquisition specifications or general specifications.

Acquisition system

Number of input channels4 analog
Ch1, Ch2, Ch3, Ch4BNC
TypeDifferential
Resolution12, 14, 16 bit user selectable
Accuracy0.3 % of full scale ± 1 LSB
Ranges200 mV to 80 V full scale
CouplingAC/DC
Impedance2 MOhm / 40 pF
Maximum input voltage (in all ranges)±200 V (DC + AC peak < 10 kHz)
with 1:10 attenuator ±300 V (DC + AC peak < 10 kHz)
Maximum Common Mode voltage200 mV to 800 mV ranges : 2 V
2 V to 8 V ranges : 20 V
20 V to 80 V ranges : 200 V
Common Mode Rejection Ratio-48 dB
Bandwidth (-3dB)DC to 50 MHz maximum
AC coupling cut off frequency (-3dB)1 Hz
Channel Isolation500 V
Channel Separation-80 dB
SureConnect 
Maximum voltage on connection200 V (DC + AC peak < 10 kHz)
Resistance measurement 
Ranges100 Ohm to 2 MOhm full scale
Accuracy3%
Response time (to 95%)< 5 ms
Maximum sampling rateOn all channels simultaneously
12 bit50 MS/s
14 bit3.125 MS/s
16 bit195.3 kS/s
Maximum streaming rateOn all channels simultaneously
12 bit500 kS/s
14 bit480.8 kS/s
16 bit195.3 kS/s
Sampling clock source 
InternalQuartz
Accuracy±0.01 %
Stability±100 ppm over -40 °C to +85 °C
Time base aging±5 ppm/year
ExternalOn extension connector
Memory128 KiSamples per channel
Trigger 
SystemDigital, 2 levels
SourceCH1, CH2, CH3, CH4, AND, OR, digital external
Trigger modesRising edge, falling edge, inside window, outside window
Level adjustment0 to 100 % of full scale
Hysteresis adjustment0 to 100 % of full scale
Resolution0.025 % (12 bits)
Pre trigger0 to 128 KiSamples, 1 sample resolution)
Post trigger0 to 128 KiSamples, 1 sample resolution)
Digital external trigger 
InputExtension connector
Range0 to 3.3 V (5 V max)
CouplingDC
 

Interface

InterfaceUSB 2.0 High Speed (480 Mbit/s); (USB 1.1 Full Speed (12 Mbit/s) and USB 3.0 compatible)
 

Power Requirements

Power from USB port500 mA max (2.5 W max)
Power via external power input / extension connector1500 mA max (7.5 W max)
Minimum voltage4.5 VDC
Maximum voltage14 VDC
 

Physical

Instrument height25 mm (1 inch)
Instrument length170 mm (6.7 inch)
Instrument width140 mm (5.2 inch)
Cord length1.8 m (70 inch)
Weight460 g (16 ounce)
 

I/O connectors

Channel 1...4Isolated BNC
USBfixed cable with USB 2.0 and USB 1.1 type A connector
Extension connectorD-sub 25 pins female
 

System Requirements

PC I/O connectionUSB 2.0 High Speed (480 Mbit/s); (USB 1.1 Full Speed (12 Mbit/s) and USB 3.0 compatible)
Operating SystemWindows 98/ME/2000/XP/Vista/7/8
 

Operating Environment

Ambient temperature0 to 55 °C
Relative humidity10 to 90% non condensing
 

Storage Environment

Ambient temperature-20 to 70 °C
Relative humidity5 to 95% non condensing
 

Certifications and Compliances

CE mark complianceYes
RoHSYes
 

Package

Convenient carry caseCarry case BB451
InstrumentAutomotive scope ATS5004D
Probes4 x Measure lead TP-C1812B, BNC -> 4 mm banana jack
Accessoires4 x Differential attenuator TP-DA10
external power cable for second USB port
SoftwareWindows 98/2000/ME/XP/Vista/7 on CD
DriversWindows 98/2000/ME/XP/Vista/7 on CD
Manualinstrument manual and software user's manuals
color printed on paper and digital on CD
Total package weightApprox. 3 kg